Teknos Drywood Woodstain VV

Teknos Drywood Woodstain VV is a waterborne low-film building product for non-dimensional stable wood applications such as exterior wood constructions, wood sidings or cladding and wooden sheds.

Best Uses

Teknos Drywood Woodstain VV is based on a combination of oil-modified waterborne binders and is suited as a waterborne (brush/spray quality) low-film building coating system on non-dimensional stable wood objects.

Teknos Drywood Woodstain VV gives excellent colouration of the wood with transparent colours. For semi-opaque colours, the wood structure is less visible. The product has good penetration into the wood, and has good adhesion on natural wood species. Provides a thin film layer in two or more layers. The product is water repellent and does not chalk off.

Note: Teknos Drywood Woodstain VV has no sealing properties against resinous content of bleeding wood species like Western Red Cedar or CCA type treated wood.

Teknos Drywood Woodstain VV is available in almost any transparent and (semi-)opaque colours. Unpigmented product (colour D740) is not appropriate for exterior use. Colours can vary and can change over time.

Application

Teknos Drywood Woodstain VV can be applied by dipping, vacuum coating, spraying or brushing on a clean surface, sanded and dry, free of dust and grease. The product should be used above 8°C with maximum 70 % relative humidity.

Typical use is 70-80 g per m2 / 60-70 g per m2 / 20-30 g per m2 on planed wood and 120-130 g per m2 / 70-80 g per m2 / 20-30 g per m2 on sanded/sawn wood. Overcoatable after approx 2 hours. Fully dry after a minimum of 48 hours.

Stir well immediately prior to use. Use the product neat. Check colour before use.