Teknos Teknoseal 4002 MDF Sealer

Non Hazardous
MDF Sealer Inhibits water / humidity ingress and provides dimensional stability.
Available in 20 Litres
£249.84 £208.20
In stock
Product Description

Teknos Teknoseal 4002 is a water borne industrial sealer for the treatment of MDF/HDF exterior grade windows and doors. It can be applied by by all conventional spraying systems - both hand spraying and automated spraying system.

Best Uses

Teknoseal 4200 is used for the treatment of MDF/HDF exterior grade for windows and doors


Pre-treatment: The material must be clean and free from wood dust and contamination. All parts must be pre-treated with a Teknos primer and in order to secure optimum effect all milled grooves and cut edges must be pre-treated by brush with TEKNOSEAL 4002 before they are sprayed.

The product is delivered ready for use. Stir the product well before use, application is by either Airmix (aircoat) or airless by hand or in automatic spraying equipment. See data sheet for spraying conditions.

All treated parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather.

Technical Details
Components: Single Pack
Type: Synthetic binder
Finish: -
Stock Colours: Colourless
Tintable: No
VOC Content: 43 g/l
Volume Solids: -
Suitable Substrates: MDF / HDF 
Application Method: Airmix (aircoat) or airless by hand or in automatic spraying equipment
Theoretical Coverage: 6-8 m²/l
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 1-2hours at 20°C
Overcoatable: After 2-3 hours at 20°C
Fully Cured: -
Cleaner / Thinner: The equipment is cleaned with water
Storage: The product must be stored at temperatures above 5 °C.
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.