£7.75 delivery on orders excluding certain products & postcodes *
Teknos Teknowall 05 benefits from a low side sheen, rich consistency and excellent hiding power. It is suitable for use on interior walls and ceilings in apartments and offices.
Teknos Teknowall 05 can be applied to concrete, plaster, filler, brick and various building board surfaces. It is also suitable for repainting of old alkyd and dispersion paint surfaces.
Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash.
Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer such as Teknos Futura 3 Adhesion primer. For smoothing of irregularities in the surface, choose a suitable filler from the Teknos Teknopro series. The dried filler is sanded down and the dust removed.
Paint concrete, plaster, filler, brick, chipboard, gypsum board and fibre board surfaces straight on with Teknos Teknowall 05 or prime with Teknos Teknoprimer 03.
Steel surfaces should be primed with Teknos Ferrex Aqua anti-corrosive paint.
Before use, stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021" .
Components: | Single Pack |
Type: | Water borne acrylate |
Finish: | Full matt, low sheen |
Stock Colours: | Just tints |
Tintable: | Yes, which can be tinted to obtain the shades in Interior Colour Cards. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 30 g/L |
Volume Solids: | 39% |
Suitable Substrates: | Can be applied to concrete, plaster, filler, brick and various building board surfaces. |
Application Method: | Brush, Roller or Spray |
Theoretical Coverage: | Previously painted surface: 7 - 10 m2 per litre Filler and wood fibre board: 6 - 8 m2 per litre Concrete and plastered surface: 5 - 7 m2 per litre |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | |
Induction Time: | - |
Pot Life: | - |
Dust Dry: | 30 minutes at 23°C |
Overcoatable: | After 1 hour minimum at 23°C |
Fully Cured: | |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years minimum in original unopened containers. |
Packaging: | Available in 2.7 and 10 Litres |