Tensid Cladex Restore

Non Hazrdous
A clear protector and restorer suitable for most types of contemporary cladding materials.
Available in 10 Litres in Clear
£482.40 £402.00
In stock
Product Description

Tensid Cladex Restore is a waterborne, clear, non hazardous surface protector and restorer suitable for most types of contemporary cladding materials.

Best Uses

Tensid Cladex Restore is ideal for use on modern cladding materials such as anodised aluminium, plastics and painted metalsurfaces. Cladex Restore will provide a durable dirt repellent UV stable surface protection and revive dull and weathered surfaces.


Always test each type of surface to ensure suitability and desired results. Apply test area according to the following application procedures. Use a simulated mohair roller, alternatively a synthetic bristle brush can be used for smaller areas. Where possible an HVLP sprayer can be used.

Clean and degrease the surface with Tensid Cladex HD or Tensid Cladex LD, depending upon the degree and type of soiling. Rinse with clean water and allow the surface to dry.

Shake the product prior to use. Apply a thin coat using cross link action i.e. top to bottom and right to left movements. Always use top to bottom as final action. The product can be diluted up to a maximum of 10% with clean water. Porous and weathered surfaces normally require priming with Tensid Cladex Prime.  Clean tools and equipment in clean water. A second coat can be applied if required.

Technical Details
Components: Single Pack
Type: Waterborne
Stock Colours: Clear
Tintable: No
VOC Content: n/a
Volume Solids:  
Suitable Substrates: Suitable for most types of contemporary cladding materials, such as anodised aluminium, plastics and painted metal surfaces
Application Method: Mohair roller, HVLP sprayer, synthetic bristle brush
Theoretical Coverage: 24 - 26 m2 per litre at 8 - 10 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 20°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: 6 months in a tightly sealed, unopened container. Store in an ambient temperature not below 0C or above 30C.
Packaging: Available in 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use