SKU: ID17543
Non Hazardous
Tensid Cladex Revive
A safe waterborne, quick drying, cleaner maintainer and surface reviver all in one. Formerly Revive AL and Revive PL.
Available in 10 Litres
3. Select a Qty
As low as:
£285.75
Inc VAT
£342.90
As low as:
Inc VAT
PRODUCT DETAILS
Tensid Cladex Revive AL is a water borne, non hazardous cleaner, maintainer and surface reviver all in one. Approved for London Underground use under LuL approval no. 2876. Formerly Revive AL and Revive PL.
Best Uses
Tensid Cladex Revive will provide a dirt repellent satin finish, cleaning and reviving dull and weathered surfaces. For both internal and external use, it is suitable for most types of contemporary materials including anodised aluminium, stainless steel, GRP and plastic type materials.
Application
Cladex Revive should be applied with a cloth or lint free paper. Follow this by polishing with a clean cloth. A second application might be required in some instances. Note that heavily soiled surfaces should be cleaned with Tensid Cladex LD or Tensid Cladex HD, prior to applying Tensid Cladex Revive.
TECHNICAL
Approvals
-
London Underground Approved Item No.2876
Technical Info
- Minimum air temperature 50°C
- Maximum relative humidity 90%
- Minimum surface temperature 50°C
- Maximum surface temperature 400°C
| Components: | Single Pack |
| Type: | Water based colution |
| Finish: | Satin |
| Stock Colours: | Opaque |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: | Anodised aluminium, Stainless Steel, GRP both internal and external |
| Application Method: | Cloth or lint free paper |
| Theoretical Coverage: | Approximately 15m2 per litre, depending upon the level of soiling |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | - |
| Overcoatable: | - |
| Fully Cured: | - |
| Cleaner / Thinner: | - |
| Shelf Life: | Minimum of 12 months in a tightly sealed, unopened container |
| Packaging: | Available in 10 Litres |
