Tensid Cladex LD

A pH neutral cleaning product.

Available in 10 Litres

2. Select a Qty

As low as:

£214.11

Inc VAT £256.93

PRODUCT DETAILS

Tensid Cladex LD is a pH neutral cleaning product formulated on the basis of surface active substances. It is biodegradable, formulated to remove atmospheric soiling and is ideal for maintenance cleaning.

Best Uses

Tensid Cladex LD is recommended for cleaning medium soiled plastic type surfaces, coated and painted surfaces. Also suitable for anodised aluminium and other types of metal based cladding materials.

Application

Always test each type of surface to ensure suitability and desired results. For initial cleaning, depending upon level of soiling, maximum dilution 1:5. For maintenance Cleaning maximum dilution 1:20. Apply the soloution with a sponge or low pressure sprayer. Leave for a few minutes, some agitation may be required. Do not allow the product to dry on the surface. Rinse thoroughly with clean water. Note: For heavily soiled surfaces use Cladex HD.

TECHNICAL

Notes

Application Conditions

Minimum air temperature 50°C
Maximum relative humidity 100%
Minimum surface temperature 50°C
Maximum surface temperature 300°C

Technical Info

Components:	Single Pack
Type:	Neutral Cladding Cleaner
Tintable:	No
Suitable Substrates:	Medium soiled plastic, coated and painted surfaces and anodised aluminium
Shelf Life:	12 months in a tightly sealed unopened container
Packaging:	Available in 10 Litres
Application Method:	Sponge or low pressure sprayer
Theoretical Coverage:	Approximately 10m2 per litre
Finish:	Appearance is a light yellow liquid
Fully Cured:	Leave product on for a few minutes but do not allow to dry on the surface