Rustoleum Graffiti Shield Hydro is an anti-graffiti product brought to you by Promain UK Ltd, that works to protect all kinds of untreated mineral substrates from the vandalism and effects that graffiti can have on your walls.
Rustoleum Graffiti Shield Hydro is best used on mineral surfaces prone to graffiti attack and works to protect the surface against water and UV light in exterior environments. Rustoleum Graffiti Shield Hydro has hydrophobic properties and stays fully intact even after graffiti has been removed from the surface, so there is no need for further application.
Rustoleum Graffiti Shield Hydro is easy to apply using airless spray, roller, brush or Graffiti Shield Spray Pump. Rustoleum Graffiti Shield Hydro has a theoretical coverage rate of 5-10m2 per litre depending on the porosity of the surfaces and is dry to touch after just 1 hour.
Use Rustoleum Graffiti Shield Cleaner to remove Graffiti from the surface once the wax has been applied or by using a Hot Pressure Washer.
Surface and Environment
Rustoleum Graffiti Shield Hydro can be applied to all clean, dry and contaminant free surfaces made out of mineral substances, including concrete, brickwork, masonry and natural stone. Rustoleum Graffiti Shield Hydro can be used in a variety of different environments to offer strong protection against a range of chemicals and solvents.
- Ideal for untreated mineral substrates like concrete, masonry and natural stone
- Water based permanent anti-graffiti coating with hydrophobic properties
- Virtually invisible
- No film-building
- Excellent UV-resistance
- Water Vapour Permeable
- Easy to apply
- Ideal for natural stone
- Clean with Graffiti Shield Cleaner
|VOC Content:||66 g/L|
|Suitable Substrates:||For mineral substrates such as concrete and brick etc.|
|Application Method:||Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||5 - 10 m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||1 hour at 20°C|
|Fully Cured:||3 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||1 year from production date, provided it is stored in the unopened original packaging, in a dry, well-ventilated space, away from direct sunlight, at a temperature between 0° and 30°C|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.