Product Description
Bedec Extra-Flex Masonry Paint, for rough-cast, pebbledash, brickwork, cement and concrete rendered surfaces, providing a smooth, long lasting finish that stretches up to 400% to prevent further cracking.
Bedec Extra-Flex Masonry Paint is an ideal purchase for anyone looking to protect exterior masonry, such as roughcast, pebble-dash, brickwork, cement and concrete rendered surfaces. The modified acrylic blend is a flexible microporous protective coating that will flex with the substrate where movement causes cracking in conventional coatings. It can be applied to previously painted surfaces after suitable preparation and can be used as an anti carbonation coating to help prevent concrete spalling.
Best Uses
Extra-Flex is best used to bridge hairline cracks found in exterior walls. It is ideally suited for the protection of exterior masonry, roughcast, pebble-dash, brickwork, cement and concrete rendered surfaces. This paint provides surfaces with a smooth, long lasting finish that stretches up to 400%, to aid the prevention of further cracking after the fine cracks have been bridged.
- Smooth finish masonry paint
- Long lasting coating
- Micro porous
- Flexible - prevents cracking
- Fine crack bridging
- Stretches up to 400%
- Available to mix in pastel colours
- Most colours available by special order.
Application
Bedec Extra-Flex Masonry Paint is suitable for application by brush, roller, airless spray, conventional spray or HVLP equipment. It should not be applied at temperatures below 10°C or if rain is expected before the paint is touch dry. The paint has a theoretical coverage rate of 10m2 per litre depending on the surface and is touch dry in just 2 hours at 20°C, where relative humidity (RH) should not exceed 65%. At this temperature, a second coat can be applied after 4 hours, although this time will need to be increased at lower temperatures. If in doubt, allow extra time for the paint to dry.
Extra-Flex is not recommended for application to Fletton or Stock Bricks or to walls that have been coated with Limewash. We can talk to you about a different coating if you need coat one of the previously mentioned substrates. Our guide to painting exterior brickwork offers advice that will help you here.
Surface and Environment
Bedec Extra-Flex is a masonry paint. It can be used on a wide range of exterior masonry surfaces and works well in the outdoor environment to protect surfaces against further damages caused by weathering. It can be applied to a range of walls and is available in almost every colour when you contact our technical support team.
Recommended Products To Use

Bedec Multi Surface Paint MSP
A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.

Bedec Superflex Elastomeric Coating for Roofs and Walls
A flexible high build elastomeric seamless waterproof membrane. Also available in a Solar Reflective finish.

Bedec Aqua Advanced HIGH GLOSS
A quick drying, water based, non-yellowing enamel for interior and exterior woodwork.

Centrecoat GS36 Fungicidal Wash, 5 Litres
Highly concentrated solution for roofs, guttering and driveways which destroys moss, mould and fungi on patios drives etc.

Tesa Professional 4440 Precision Mask Outdoor Masking Tape
An ideal masking tape solution for masking windows, masonry, gutters, cladding and more. professional external paint jobs.

Bedec Interior / Exterior Stain Block
Stain blocker for nicotine stains, water stains, crayon stains, marker pen stain block. Suitable graffiti block.

Centrecoat GS36 Fungicidal Wash Concentrate, 240 ml
For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to ...