Wethertex ST1 Quick Drying Stabilising Primer

For use when preparing unstable exterior surfaces for painting prior to use of Wethertex HBS.

Available in 5 Litres in Clear

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£22.12

Inc VAT £26.54

PRODUCT DETAILS

Wethertex ST1 Quick Dry Stabilising Primer is the recommended primer product for use when preparing unstable exterior surfaces for painting prior to use of Wethertex HBS.

Best Uses

Wethertex ST1 Quick Dry Stabilising Primer is especially developed using fine particle sized polymers. Therefore, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability. The quick drying nature of Wethertex ST1 Quick Dry Stabilising Primer allows Wethertex masonry paints to be applied with minimum delay.

Application

Remove all loose and flaking material from the substrate, including algae growth. This should be removed with Wethertex C10 Fungicidal Wash or a suitable fungicidal wash such as Centrecoat GS36. Also ensure all damaged areas in the substrate have been repaired with a suitable exterior filler.

Wethertex ST1 Quick Dry Stabilising Primer is applied neat with a roller, or brush in one generous coat.

TECHNICAL

Components:	Single Pack
Type:	Water based
Finish:
Stock Colours:	Clear
Tintable:	No
Volume Solids:
Suitable Substrates:	Masonry and previously painted substrates
Application Method:	Brush, Roller, Spray
Theoretical Coverage:	Approximately 25m2 per 5 litre dependent on the nature and porosity of the surface
Surface Dry:
Overcoatable:
Fully Cured:
Cleaner / Thinner:	Clean up with Water
Shelf Life:	12 months from the date of manufacture
Packaging:	Available in 5 Litres