Blackfriar Acrylic Floor Paint is water based and suitable for use on most previously painted surfaces, offers a quick drying time and provide users with a tough semi-gloss finish.
Blackfriar Acrylic Floor Paint is used to protect and transform floors with an attractive, hard wearing, tough and durable finish, available in black, green, red, grey and white. Blackfriar Acrylic Floor Paint can be applied to most Workshop floors to provide users with a tough semi-gloss finish.
Blackfriar Acrylic Floor Paint is suitable for use on most previously painted surfaces and is water based product with quick drying time, which helps minimise downtime, thus preventing money loss. Blackfriar Acrylic Floor Paint has low odour properties which are ideal where paint odours currently present an issue.
Blackfriar Acrylic Floor Paint can be applied indoors or outdoors on workshop floors and can be applied using brush or roller to achieve the desired finish, with a theoretical coverage rate of 10-12m2 per litre. In conditions of about 20° Celsius, your drying time will be approximately 4-6 hours, this will increase or decrease depending on warmer or colder conditions.
Surface and Environment
Blackfriar Acrylic Floor Paint is ideal for use on most surfaces, including wood, concrete, asphalt and tarmac in light traffic areas and areas with heavy foot traffic. Blackfriar Acrylic Floor Paint is resistant to spillages including, oil, grease and a variety of chemicals and household liquids such as coffee and tea. This product works excellently at resisting against abrasion and will not be affected by the heavy level of foot traffic.
- Ideal for most surfaces including wood, concrete, asphalt and tarmac in light traffic areas
- Low odour, ideal where paint odours present an issue
- Suitable for previously painted surfaces
- Quick Drying Water-based
- Use Indoor and outdoors
|Type:||Water Based Acrylic|
|Stock Colours:||Black, Green, Mid Grey, Tile Red, White|
|VOC Content:||140.0g per Litre|
|Suitable Substrates:||For internal and external wood, concrete, asphalt and Tarmac®|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||10 - 12 m2 per litre per coat. Two coats recommended|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||4 - 6 hours at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Fully Cured:||3 - 5 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.