Teamac Boot-Topping Paint is a tough, durable and flexible boot topping paint, ideal for application to boat hulls between the waterline and the load line of the vessel.
Teamac Boot-Topping Paint is a modified long oil alkyd, marine gloss paint designed for marking the water line on boats and yachts. Bootline Marine Gloss Paint from Teamac is a tough, durable and flexible paint, available in 6 different colours, ideal for application to boat hulls.
Teamac Boot-Topping Paint is used to paint the area of a hull between the waterline and the load line of a vessel. Provides a hard surface that is less receptive to marine growth and polishable to remove grime.
Teamac Boot-Topping Paint is easy to apply using brush, roller or airless spray and has a good coverage rate of 11-12m2 per litre and comes available in 1, 2.5 and 5 litre tubs. Teamac Boot-Topping Paint usually require 2 coats and after one coat the surface will be touch dry after 4 hours and ready for recoating after 8 hours.
Surface and Environment
Teamac Boot-Topping Paint is easy to apply and is suitable for use on a variety of different surfaces in the marine environment, including, metal, wood, fibreglass and PVC.
|Stock Colours:||Blue, Grey, Red, Black and White|
|VOC Content:||480.0g per Litre|
|Volume Solids:||39 - 45% Depending on Colour|
|Suitable Substrates:||Prepared wood and steel. Can be used directly on GRP|
|Application Method:||Brush, Roller, Airless Spray|
|Theoretical Coverage:||12 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||80 microns|
|Dry Film Thickness (DFT):||30 - 35 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||12 hours or Overnight at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 1 and 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.