Carboline Phenoline 187 VOC

A high solids epoxy tank lining with exceptional chemical resistance. Formulated primarily as a tank lining.

Available in 10 Litres in White and Grey

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£165.84

Inc VAT £199.01

PRODUCT DETAILS

Carboline Phenoline 187 VOC is a high solids epoxy tank lining with exceptional chemical resistance.

Suitable replacement for 3M Scotchkote EA4 2217 Epoxy Coating for storage of aviation fuel.

Best Uses

Carboline Phenoline 187 VOC is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C), food and beverage industries, and water and wastewater exposures.

High solids; Low VOC formula
VOC compliant to current AIM regulations
Excellent overall chemical resistance
Excellent for crude-oil storage
Excellent resistance up to 204°C
Excellent abrasion & thermal shock resistance
Meets the FDA requirements for 21CFR 175.300 for direct food contact
Passes EI 1541 jet fuel gum test

Carboline Phenoline 187 VOC is excellent as a protective coating under insulation, operating at (400°F/204°C). Provides outstanding resistance to wet/dry cycling conditions at these elevated temperatures.

Application

Apply via conventional spray, airless spray, or brush / roller for small difficult areas only. See product data sheet for full preparation and application guidance.

TECHNICAL

Components:	Two Pack
Type:	Polyamine Cured, Modified Epoxy Phenolic
Finish:	Semi Gloss
Stock Colours:	White and Grey
Tintable:	No
VOC Content:	240 g/L
Volume Solids:	84%
Suitable Substrates:	Steel, Stainless Steel
Application Method:	Brush, Roller Conventional Spray or Airless Spray
Theoretical Coverage:	33.1 m²/l at 25 microns 8.3 m²/l at 100 microns 5.5 m²/l at 150 microns Allow for loss in mixing and application.
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	102 - 152 microns per/coat
Induction Time:	-
Pot Life:	1 hour at 24°C, 2 hours at 15°C. Less at higher temperatures.
Surface Dry:
Overcoatable:	36 hours - 30 days at 10°C
Final Cure For Immersion:	14 days at 10°C
Cleaner / Thinner:	Use Carboline Thinner No 2 or Acetone.
Shelf Life:	Part A 12 months, Part B 6 months in original unopened containers.
Packaging:	Available in 10 Litres