Centrecoat Clearcoat

SKU
id25286
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
A 2 pack rapid curing and versatile chemical resistant sealer / clear coating for concrete and Centrecoat epoxy screeds and mortars.
Available in 1, 2 and 5 Kg in Clear
From £31.86 £26.55
In stock
Only %1 left
Product Description

Centrecoat Clearcoat is a 2 pack rapid curing and versatile chemical resistant sealer/clear coating for concrete and a compatible range of Centrecoat epoxy screeds and mortars.

Best Uses

Centrecoat Clearcoat is ideal as a clear sealer for a Centrecoat SL Screed flake system and as a clear coating for concrete, natural stonework, etc. Also suitable as a binder for coloured quartz or natural stone.

  • Solvent free, low odour
  • Excellent adhesion to concrete and stonework
  • UV stable
  • Cures under cool, damp conditions
  • Low viscosity, easily applied
  • Excellent resistance to dilute acids and alkalis, oil, petrol, diesel and vegetable oils

Centrecoat Clearcoat provides a glossy, tack free surface, even under conditions of high humidity, and is effectively non-yellowing under the influence of UV light.

Application

All surfaces should be sound, clean, and free from dust, dirt, laitance, oil and other contaminants. All laitance must be removed by vacuum grit blasting, ensuring that any residual dust is removed prior to coating application. New concrete surfaces must be a minimum of 21 days old and/or have a residual moisture content below 6%. For sealing a flaked Centrecoat SL Screed, ensure that the screed surface has been thoroughly ‘de-nibbed’ and is free from contaminants.

Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means, until a uniform consistency is achieved.

Apply by brush, or roller to the prepared surface at a nominal rate of 0.15 - 0.30 Kg per m2. Should a second coat be required, allow the first coat to cure for a minimum period of 14 hours at 20°C.

Technical Details
Components: Two Pack
Type: Epoxy
Finish: Glossy
Stock Colours: Clear
Tintable: No
VOC Content:
Volume Solids:
Suitable Substrates: For concrete, stonework and a compatible range of Centrecoat epoxy screeds and mortars.
Application Method: Brush, Roller
Theoretical Coverage: 0.15 - 0.30 Kg per m2 per coat
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: 25 - 30 minutes at 20°C
Foot Traffic Ready: 14 hours at 20°C
Vehicle Traffic Ready: 24 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean equipment with Centrecoat MMA Tool Cleaner prior to the curing of the coating.
Shelf Life: Minimum 12 months when stored in original, unopened containers.
Packaging: Available in 1, 2 and 5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use