Centrecoat R05 BF Facade Cleaner

UN1791 (Class: 8, Pk Grp: III)
A high performance renovating cleaner formulated to remove algae growth from exterior walls and facades.
Available in 1 and 5 Litres
From £16.03 £13.36
In stock
Only %1 left
Product Description

Centrecoat R05 BF Façade Cleaner is a high performance renovating cleaner formulated to remove algae growth from exterior walls and façades.

Best Uses

Centrecoat R05 BF Façade Cleaner is suitable for the cleaning and removal of organic and microbiological growth such as moss, lichen and algae from vertical walls such as building façades, domestic and commercial walls, retaining walls, bridges, car parks, heritage buildings. Suitable for both internal and external use. Suitable for use on porous façade surfaces such as natural stone, cement, tarmac, brick, terracotta and more.


Supplied ready to use. Apply neat to a dry or damp surface with a brush, roller or sprayer. Soak the area with a generous, even application. Leave for 20 - 90 minutes, then rinse with water and allow to dry. Ideally afterwards protect the cleaned surface with a suitable anti fungal agent to limit regrowth.

Technical Details

Technical Info

  • Always test in a small area prior to use
Components: Single Pack
Type: Light Gel
Finish: -
Stock Colours: Pale Straw
Tintable: No
VOC Content: 0g/l
Volume Solids: -
Suitable Substrates: Natural Stone, Cement, Tarmac, Brick Terracotta etc.
Application Method: Brush, Roller or Sprayer
Theoretical Coverage: Heavy Soiling: 3m2/l, Light Soiling: 5m2/l
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Clean equipment with clean warm water
Shelf Life: 12 months from date of production unopened
Packaging: Available in 1 Litre & 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use