Centrecoat Thermoplastic Hazard Teeth

SKU
id9933
Non Hazardous
High quality, durable, preformed road marking. Fast to apply ensures minimal downtime
Available in Various Sizes in White
From £19.08 £15.90
In stock
Only %1 left
Product Description

Centrecoat Thermoplastic Hazard Teeth are preformed, permanent thermoplastic markings, manufactured for use on roads and in car parks. These Hazard Teeth are supplied ready to use and will adhere to most surfaces in most weather conditions. These logos are manufactured to the highest quality with the best thermoplastic, ensuring a long service life and minimum maintenance.

Best Uses

Centrecoat Thermoplastic Hazard Teeth are hard wearing, stick to most surfaces and are ideal for application to cycle lanes, car parks and walkways. Optional reflective glass beads are available too, so you can see the markings clearly at night time.

Application

Centrecoat Thermoplastic Hazard Teeth can be applied efficiently using a thermoplastic gas torch and offer quick drying times of just a couple of minutes. Once dry, the surface can be walked on soundly straight away.

Surface and Environment

Centrecoat Thermoplastic Hazard Teeth have been specifically designed and manufactured for outdoor application to hard surfaces, mainly concrete. Asphalt and tarmac are also suitable for application.

Technical Details

Properties

  • Hard wearing.
  • Stick to most surfaces.
  • ideal for car parks, walkways, cycle lanes and new or reinstatement work on roads.
  • Easy to apply.
  • Supplied ready to use.
  • Optional reflective glass beads to increase visibility at night.
  • Use spray tack coat primer when applying to old, worn surfaces.

Technical Info

  • Apply with blow torch.
  • Dries in minutes.
  • Can be driven over once dry.
  • Sizes shown in millimetres.
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use