Centrecoat Aerosol Tack Coat for Thermoplastic Road Signs

SKU
ID3551
UN1950 (Class: 2.1)
For preformed thermoplastic road marking lines and tapes in car parks and on tarmac roads.
Available in 750ml Aerosol
In stock
Only %1 left
Product Description

Centrecoat Aerosol Tack Coat for Thermoplastic Road Signs is designed for external use or internal car parks for use on concrete, old asphalt, block paving, tarmac and other stone surfaces.

Please note, this product is temporarily out of stock. Please call for updates. See Centrecoat Thermoplastic Primer as a potential alternative.

Best Uses

Centrecoat Aerosol Tack Adhesive for Thermoplastic Road Lines has been designed to form a tacky adhesive coat for use with thermoplastic road markings and tapes to aid adhesion when applying thermoplastic lines with a gas torch. Thermoplastic lines can not be stuck down with this product alone. Centrecoat Aerosol Tack Coat is easy to use and doesn't make any mess during application.

Centrecoat Aerosol Tack Coat for Thermoplastic is best used to help thermoplastic products adhere to the surface before application using a Thermoplastic Gas Torch.

Application

Centrecoat Aerosol Tack Coat for Thermoplastic products is available in 750ml aerosol tins for quick and simple spray application. Centrecoat Aerosol Tack Coat has a theoretical coverage rate of 80 metres at 100mm width and 100 metres at 50mm width. Centrecoat Aerosol Tack Coat for Thermoplastic has a fast drying time of 10-15 minutes and should be applied to clean, dry and contaminant free surfaces.

Surfaces to be tack coated should be clean, dry and dust free before applying Thermoplastic Line Tape.

When applying thermoplastic to concrete or block paving a tack adhesive must be used.

Surface and Environment

Centrecoat Aerosol Tack Coat for Thermoplastic is designed for external use or internal car parks for use on concrete, old asphalt, block paving, tarmac and other stone surfaces.

Technical Details

Notes

  • Coverage rate 25-30 metres at 100 mm wide, 50-60m of 50mm wide line
  • 1x 750ml Aerosol will be sufficient for 12-15 100mm wide 5 metre long rolls

Technical Info

Components: Aerosol
Type:  
Finish: -
Stock Colours: Clear
Tintable: No
VOC Content: 544.0g per Litre
Volume Solids: -
Suitable Substrates:  
Application Method: Aerosol
Theoretical Coverage: 25-30 metres at 100 mm wide, 50-60m of 50mm wide line
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 10 - 15 mins at 20°C
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: -
Shelf Life:  
Packaging: Available in single 750ml aerosols
Product Data Sheet (84.69 kB)
Safety Data Sheet (298.61 kB)

Related Products