Coo-Var ProGrip 2 Pack Anti-Slip Floor Paint
Coo-Var ProGrip is an exceptionally hard-wearing pre-aggregated water-based 2 pack epoxy floor coating, which dries to an aggregated, off-gloss finish. To save you time, the aggregate is pre-mixed into the paint giving you an even aggregated finish. ProGrip can be used internally or externally, is suitable for heavy traffic areas and can be used on multiple surfaces, including existing stable paints.
Best Uses
Coo-Var ProGrip is ideal for use in heavy traffic areas for foot traffic, trucks, vans, and forklifts, It is suitable for both indoor and outdoor use. ProGrip can be used on wood, concrete, masonry, tiles, asphalt, and tarmac and can be applied over stable existing paint coverings. Do not apply at temperatures below 10°C. Coo-Var ProGrip is available in seven standard colours, plus a range of other colours to order.
Application
Coo-Var ProGrip should be diluted with 250ml of clean water per 5kg pack. All surfaces should be clean, dry, and free from contaminants. Like many of the products we offer you at Promain, ProGrip should be applied using brush or roller. Do not apply ProGrip if the room temperature is likely to drop below 10°C during application or during the drying process. In confined spaces provide adequate ventilation during application and drying.
Mixing
This product is packed in pre-measured units and must not be split down further. The contents of the two containers (Part A and part B should be mixed thoroughly using a slow speed drill and jiffy type paddle for a minimum of 2 mins). Add 250ml of clean water to the blend and mix for a further 2 mins.
Surfaces/Environment
ProGrip is ideal for use in heavy traffic areas for foot traffic, trucks, vans, and forklifts, inside and outside. Coo-Var W280 ProGrip can be used over stable existing paint coverings on wood, concrete, masonry, asphalt, and tarmac.
ProGrip is part of the extensive range of Coo-Var Anti Slip products available from Promain.
| Components: | Two Component Pack |
| Type: | Water Based |
| Finish: | Off-Gloss Finish |
| Stock Colours: | Tile Red, Grey, Green, Safety Yellow, Safety Red, Black and White |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | Below 10g/litre |
| Volume Solids: | 55-85% |
| Suitable Substrates: | Wood, Concrete, Masonry, Asphalt, Tarmac |
| Application Method: | Brush or Short Pile Roller |
| Theoretical Coverage: | 6-10 sq/m per kilo |
| Wet Film Thickness (WFT): | 100 µm |
| Dry Film Thickness (DFT): | 35-70 µm |
| Induction Time: | - |
| Pot Life: | 2-4 hours at 20°C |
| Initial Cure: | 4 hours at 20°C |
| Overcoatable: | Minimum 16 hours at 20°C to maximum 72 hours |
| Hard Dry: | 8-12 hours at 20°C |
| Fully Cured: | 5-7 days at 20°C |
| Cleaner / Thinner: | Clean Water |
| Shelf Life: | See tin for shelf life and storage information |
| Packaging: | Available in 5kg tins |
