Rustoleum EpoxyShield Decorative Chips Flakes

SKU
id3608
Non Hazardous
A low cost way of adding decoration to garage or workshop floors.
Available in 0.43 Kg box in a mixture of Blue, Black, White and Grey
£9.79 £8.16
In stock
Product Description

Rustoleum EpoxyShield Decorative Flakes are a low cost way of adding decoration to garage or workshop floors.

Rustoleum EpoxyShield Decorative Flakes are part of Promain's range of Decorative Flakes designed for use on floors and can be added to garage floor coatings to produce a decorative, protective finish.

Best Uses

Rustoleum EpoxyShield Decorative Flakes are best used in conjunction with garage floor coatings and can be mixed directly into the paint of scattered across the wet substrate to produce a broad casted finish.

Application

Rustoleum EpoxyShield Decorative Flakes are easy to apply and available in a 0.43kg box designed to cover approximately 25m2 of flooring.

Surface and Environment

Rustoleum EpoxyShield Decorative Flakes are a low cost way of adding decoration and protection internally and externally. Rustoleum EpoxyShield Decorative Flakes are an additive ideally used on garage floors.

Technical Details

Components: Single Pack
Type: Decorative Flakes Additive
Finish: Decorative Protective Finish
Stock Colours: -
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: Garage or Workshop Floors
Application Method: Add to garage floor coatings
Theoretical Coverage: 1 box is enough to add to 25m2 of floor
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: Refer to Floor Coating Teachnical Data Sheet
Overcoatable: -
Fully Cured: Refer to Floor Coating Teachnical Data Sheet
Cleaner / Thinner: -
Shelf Life: -
Packaging:  Available in a 0.43kg box

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use