FERFA Floor Category Coatings

Home
Floor Paints & Coatings
FeRFA Floor Category Coatings

FeRFA, the Resin Flooring Association, is a not-for-profit organisation representing the leading manufacturers, specialist contractors and associated companies involved in industrial and commercial resin flooring, screed and surface preparation. FeRFA do not represent the domestic/residential resin driveway industry.

Synthetic resin flooring is classified into eight specific types, each exhibiting its own particular performance characteristics. A variety of synthetic resins, typically epoxy, polyurethane and methacrylate, can be formulated to produce the different resin types.

Centrecoat ArmourCoat HB 3-400
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

From £79.44 £66.20
Centrecoat Armourcoat WB 2-80
A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

From £89.58 £74.65
Centrecoat Armourcoat WB 2-200
Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.

From £122.10 £101.75
ResDev Pumatect
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

From £79.44 £66.20
Centrecoat Armourcoat 3-350
Provides a tough, hard wearing coating for medium duty traffic giving high film build and wear resistance.

From £98.75 £82.29
PPG SigmaCover 2 / Amerlock 2 Low Temperature
A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.

From £88.62 £73.85
Tikkurila Temafloor P300 2 Part Solvent Free Epoxy Coating
For use on concrete floors in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors.

From £119.51 £99.59

BS 8204 Part 6 Synthetic Resin Flooring Type Categorisation

BS 8204-6, Section 6.2 (following the FeRFA scheme) classifies the types, varying in thickness and surface finish:

FeRFA No	Type	Description	Duty	Typical Thickness
1	Floor Seal	Applied in 2 or more coats. Generally solvent or water borne	LD	> 150μm
2	Floor Coating	Applied in 2 or more coats. Generally solvent free	LD / MD	150 - 300μm
3	High build floor coating	Applied in 2 or more coats. Generally solvent free	MD	300 - 1000μm
4	Multi-layer flooring	Aggregate dressed systems based on multiple layers of floor coatings or flow-applied flooring, often described as sandwich systems	MD / HD	> 2mm
5	Flow-applied flooring	Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface	MD / HD	2 - 3mm
6	Resin screed flooring	Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimise porosity	MD / HD	> 4mm
7	Heavy duty flowable flooring	Having a smooth surface	HD / VHD	4 - 6mm
8	Heavy duty resin flooring	Trowel-finished, aggregate filled systems effectively impervious throughout their thickness.	VHD	> 6mm

LD – light foot traffic, occasional rubber tyre vehicles, MD – regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys, HD – constant fork lift truck traffic, hard plastic wheeled trolleys, some impact, VHD – severe heavily loaded traffic and impact

FeRFA Floor Category Coatings

BS 8204 Part 6 Synthetic Resin Flooring Type Categorisation