Rust-Oleum Pegakote Epoxy Floor Paint is a very hard two-component water dilutable epoxy coating designed for interior use on floors and walls. Exceptional abrasion resistance, resistant to oils and solvents, easy to clean, almost odourless and solvent free. Pegakote is suitable for use in garages, warehouses, showrooms, corridors, indoor car parks, workshops, commercial kitchens etc.
Rust-Oleum Pegakote Epoxy Floor Paint is best used in garages, warehouses, showrooms, corridors, indoor car parks and workshops. Rust-Oleum Pegakote is suitable for use on walls as well as floors and we would advise that this product only be used for indoor applications. Recommended for use on floors that are subjected to heavy abrasion as the product provides very good abrasion resistance and has excellent anti slip properties. Rust-Oleum Pegakote has been used for painting large indoor car parks, as you can see in the case study history.
Rust-Oleum Pegakote Epoxy Floor Paint should be applied using roller or airless spray. We would recommend the use of roller for a cleaner end result. When applying Pegakote, the room temperature should be no less than 8°C. This product is touch dry in 9 hours and recoatable after 24 hours.
Rust-Oleum Pegakote Epoxy Floor Paint is best used in domestic and commercial garages, warehouses, commercial kitchens, showrooms, corridors, indoor car parks and workshops.
|Stock Colours:||Steel Grey, Light Grey|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||0 g/l|
|Volume Solids:||48% - 50%|
|Suitable Substrates:||Mineral substrates (old concrete, tiles, glass etc.)|
|Application Method:||Brush, Roller, Airless Spray|
|Theoretical Coverage:||300 gms per m2 per coat. 50m2 per 15kg tin per coat|
|Wet Film Thickness (WFT):||200 microns|
|Dry Film Thickness (DFT):||100 microns|
|Pot Life:||2 hours at 20°C|
|Touch Dry:||9 hours at 20°C|
|Overcoatable:||24 hours at 20°C, 48 hours at 8-10 °C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years|
|Packaging:||Available in 4 Kg and 15 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Anti-slip aggregate additive for floor paint, can be added to most floor paints to aid slip resistance.