Full Product Catalogue

Single Pack One-Stage Semi-Gloss, apply directly to suitably prepared bare steel and old finishes, touch dry in 40-60 minutes.

Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.

A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.

A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

Selemix Thinner 1-215 for use with Selemix paints.

Selemix System Glass Additive can be added to Selemix 2k paints when adhesion to glass is required.

Selemix thinner 1-400 has been specially blended for use with Selemix paints.

Selemix Thinner 1-610 for use with Selemix synthetic paints.

Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.

Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.

Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.

A single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.

Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.

Selemix 1-205 Thinner for use with Selemix paints.

Formulated with enamel this product has high level of durability, excellent opacity and a high gloss finish, ideal for protecting ferrous steel.