£9.95 delivery on orders excluding certain products & postcodes *
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
A suitable thinner for various products within the International range.
A quick drying single pack primer for maintenance above water areas that is compatible with most substrates.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A TBT free anti-fouling from International Paints. Can be applied down to -5°C.
Formulated as a cosmetic finish above water in marine environments. NORSOK approved.
A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A two component, metallic zinc primer for steel in aggressive environments.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.
Suitable for thinning paints and equipment cleaning from International Paints.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A surface tolerant, one pack primer. Compatible with a wide range of International finishes.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A single component, finish suitable for areas subject to intermediate service temperature that require a coloured finish.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.