£9.95 delivery on orders excluding certain products & postcodes *
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.
Provides up to two hours cellulosic fire protection on various steel sections exposed in interior environments.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.