Teamac Hammercote Hammered Enamel Paint is part of our range of fast drying Hammered Finish Paint formulated for use on metal to produce a metallic hammered finish.
Teamac Hammercote Hammered Enamel Paint can be used where a fast drying finish is needed and this product has outstanding drying properties that takes only 15 minutes to become touch dry at 20°C. It is a one coat system ideally suited for the decoration and protection of metal work. It is non yellowing, fast drying and oil and grease resistant when fully dried. All colours are lead free.
Teamac Hammercote Hammered Enamel Paint is best used for providing a hammered finish and excellent protection to a variety of metal surfaces and is suitable for use on cars, radiators, trailers, fences, railings and garden furniture, tools, casings, metal furniture, gates and railings, interior and exterior.
Teamac Hammercote Hammered Enamel Paint can be applied directly onto any metal surface using brush, roller or airless spray, where a fast drying coat is required. Teamac Hammercote Hammered Enamel Paint has a theoretical coverage rate of 5-10m2 per litre and is available in 5 litre tins. High film build when brushing ensures excellent corrosion resistance. Recoating after 36 hours will cause the film to wrinkle. Best results seen when all coats are applied in quick succession. After 36 hours, Hammercote cannot be recoated for up to 6 weeks. On galvanised surfaces, apply Etchcote TW. Allow to dry before painting. On aluminium surfaces, apply Etch Primer (2K).
Surface and Environment
Teamac Hammercote Hammered Enamel Paint is available in a variety of different metallic colours that produce a glossy hammered finish. Teamac Hammercote Hammered Enamel Paint provides surfaces with excellent corrosion resistance internally and externally. Hammered Finish Paints are used to provide decoration and protection to all kinds of metal equipment.
- Hammercote Hammered Enamel Paint is a fast drying coating giving a metallic hammered finish to metal objects
- Hammercote is suitable for use on radiators, cars, trailers, fences, railings, tools
- Use Hammercote Hammered Enamel Paint on any metalwork where a fast drying finish is required straight onto the surface
- On galvanised surfaces, apply Etchcote TW - Allow to dry before painting
- On aluminium surfaces, apply Etch Primer (2K). Allow to dry before painting. After 36 hours, recoating will cause the film to wrinkle. Leave for minimum 6 weeks before overcoating
- Do not apply when RH exceeds 88% or the surface is less than 2°C above dew point
- Drying will be affected in cold conditions
|Stock Colours:||8 colours, black and silver|
|VOC Content:||467 - 555.0g per Litre|
|Suitable Substrates:||For metal surfaces|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||10m2 per litre at 40 - 45 microns|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||40 - 45 microns|
|Touch Dry:||30 minutes at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinner 15|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.