SKU: ID23829
Non Hazardous

Hempel 48880 Hempafire Optima 500

Low-VOC intumescent coating for fire protection of steel.
Available in 20 Litres in White 10000
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£271.22
Inc VAT £325.46
PRODUCT DETAILS

Hempel 48880 Hempafire Optima 500 is a very low VOC, single pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires.

Best Uses

Hempel 48880 Hempafire Optima 500 is formulated as Intumescent fire protection for structural steel exposed to internal environments up to C3 (ISO-12944). Suitable for I-section beams, H
columns, hollow section beams and columns and Cellular Beams. Also suitable for repair and touch-up coats for damaged areas of freshly applied Hempafire Optima 500.

  • Developed to increase the efficiency of the entire PFP project, from initial specification through to final application
  • Increased productivity thanks to high DFT per coat and faster drying, thus providing the required fire protection in less coats, reduced application costs and faster process time
  • Tested according BS-476 20/21 and with ApplusFire third party certificate
  • One product for most common section types to reduce the complexity in the application and design specification stages
  • Ease of application contributes to smooth surface and excellent aesthetic results of protected steel
  • Contributes to Green Buildings Standard credits like LEED and BREEAM.

Optimized for on site applications at R120. Applications in shop and/or R180 may be possible depending on the project.

Application

Contact our technical team for a full specification and application guidance for your individual circumstance.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

TECHNICAL

Certificates and Approvals

  • APF-1679. Up to 180 minutes.
  • Complies with the European Fire Standard EN 13501-1, reaction to fire classification, when used as part of a predefined paint system
  • Assessed according to BS 476-21. Fire resistance of structural steel up to 180 minutes, includes Cellular Beams.

Technical Info

Components: Single Pack
Type: Intumescent
Finish:  
Stock Colours: White 10000
Tintable: No
VOC Content: 0 g/L
Volume Solids: 70%
Suitable Substrates: Internal Structural Steel
Application Method: Airless Spray
Theoretical Coverage: Dependent on Specification
Wet Film Thickness (WFT): Dependent on Specification
Dry Film Thickness (DFT): Dependent on Specification
Induction Time: -
Pot Life: -
Surface Dry: Dependent on Specification
Overcoatable: Dependent on Specification
Fully Cured: Dependent on Specification
Cleaner / Thinner: Do not thin
Shelf Life: See container
Packaging: Available in 20 Litres

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
RODO Paddle Mixer
From £4.38
(£5.26 Inc VAT)
Hempel Hempadur 15553 Primer
From £49.89
(£59.87 Inc VAT)
Hempel Hempadur Speed Dry ZP 600
A self-priming, two-component, high build epoxy paint containing zinc phosphate.
From £42.17
(£50.60 Inc VAT)
Hempel Speed Dry Alkyd 43140
From £28.39
(£34.07 Inc VAT)
Hempel Hempatex Hi-Build 46410 Container and Cladding Paint
From £34.85
(£41.82 Inc VAT)
Hempel Hempatex Enamel 56360
From £46.96
(£56.35 Inc VAT)
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved No.169.
From £63.60
(£76.32 Inc VAT)