Rustoleum Mathys 8300 Mould Resistant Paint. Rustoleum Cold Store 8300 is mould resistant as it contains anti-fungal additives, these will stay active for years when frequently cleaned and scrubbed.
Rustoleum Cold Store Paint are fast drying and non yellowing which is an ideal product for use in cold stores. Rustoleum Mould Resistant 8300 is based on vinyl acrylics with non leaching fungicides.
Rustoleum Mathys 8300 Mould Resistant Paint is designed for Walls and Ceilings and should ideally be applied over 8399 masonry sealer. This is when this cold store paint is most effective, however, it is not essential to apply over masonry sealer. The clue is in the name, and this Cold Store Paint is ideal for use in refrigerated areas, and offers quick drying time even in temperatures below freezing.
Rustoleum Cold Store Paint can be applied using brush, roller or airless/air-atomised spray and can be applied in conditions up to -10°C so long as the surface is free from ice. Ideally 8399 sealer would be used first, but if not then this will not affect the drying times as this product will be touch dry in 6-8 hours in temperatures below freezing. To ensure homogeneity this product should be thoroughly stirred prior to use.
Rustoleum 8300 Cold Store Paint is designed for use on walls and ceilings and can be used on a variety of different surfaces, including masonry, plaster and concrete. The Food and Beverage industries are ideal places in which to use this Paint as they often contain refrigerated conditions with low temperatures. If you have any questions regarding this product please do not hesitate in contacting our technical support team for extra help.
- A hygiene coating developed for use on walls and ceilings
- Rustoleum Mathys 8300 is based on vinyl acrylics with non-leaching fungicides
- Fast drying, fast recoatable
- Non yellowing
- Apply over 8399 masonry sealer
- Ideal for use in cold-stores
- Ideal on masonry, plaster or concrete for the food and beverage industries
|Type:||Single pack hygienic topcoat|
|Stock Colours:||RAL 9010 and RAL 1015|
|Tintable:||Yes, minimum order quantity 150 Litres. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||458.0g per Litre|
|Suitable Substrates:||Should be applied on mineral substrates primed with Primer 8399|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||12 m2 per litre|
|Wet Film Thickness (WFT):||85 microns|
|Dry Film Thickness (DFT):||35 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 6 hours at 20°C|
|Fully Cured:||8 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in 5 and 20 (4 x 5) Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.