Coo-Var Masonry Stabiliser Sealer is a binding and sealing solution for degraded and porous masonry.
Coo-Var Masonry Stabiliser is designed for use on unstable brick, screed or plaster prior to painting.
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Remove all loose, flaking material. Mix well before use.
|VOC Content:||571 g/L|
|Suitable Substrates:||For use on unstable brick, screed or plaster prior to painting|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||9 m2 per litre at 110 microns|
|Wet Film Thickness (WFT):||110 microns|
|Dry Film Thickness (DFT):||25 - 30 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 12 hours minimum at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||See container|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.