Please note the manufacturer is advising delivery will take approx 3 - 5 days for delivery of this product.
Coo-Var P101 is a two pack, clear polyurethane Anti-Graffiti coating for walls and ceilings, which provides walls and ceilings with excellent graffiti resistance.
Coo-Var P101 is a two pack Anti-Graffiti Paint Coating designed for walls and ceilings. P101 is a clear polyurethane paint coating providing excellent graffiti resistance on interior and exterior surfaces. Anti-Graffiti Coatings are ideal for use in areas where there is a high risk of graffiti. Coo-Var P101 Anti-Graffiti Paint Coating can also be tinted to most BS and RAL colours.
Coo-Var P101 Anti-Graffiti Paint for Walls and Ceilings is best for use to protect walls and areas such as bridges, statues and other surfaces which may be prone to graffiti vandalism. Coo-Var P101 Anti-Graffiti Paint should be used in areas with a high level of hygiene and chemical contact. This Anti-Graffiti Coating can be used over compatible water based paints to provide a protective glaze over the colour. Coo-Var P101 Anti-Graffiti Coating should not be used over conventional solvent based paints.
P101 from Coo-Var is an anti graffiti paint that should be applied using a brush or short haired roller. It can also be applied using a spray, given the right conditions - however, we would recommend that spraying should be avoided if possible. Coo-Var P101 Anti-Graffiti Paint Coating can apply directly onto the surface.
Surface and Environment
Coo-Var P101 Anti Graffiti Coating is designed for use in areas with a high level of hygiene requirements, chemical contact, or surfaces subject to graffiti attack. It is ideal for use on areas such as walls, bridges, statues, and public toilets, with a range of different surfaces.
- P101 Anti-Graffiti Coating - Two Pack
- Clear aliphatic polyurethane paint coating
- Provides graffiti resistance to B.S. Flame Spread Rating
- Can be used on a range of surfaces
|Tintable:||No. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||498.0g per Litre|
|Suitable Substrates:||For bridges, statues, walls, toilets and more|
|Application Method:||Brush, Short Haired Mohair Roller or Airless Spray|
|Theoretical Coverage:||35 - 40 m2 per 5 Kg pack at 75 microns|
|Wet Film Thickness (WFT):||120 - 135 microns|
|Dry Film Thickness (DFT):||65 - 75 microns|
|Pot Life:||6 - 8 hours at 20°C|
|Touch Dry:||3 - 4 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Do not thin|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.