Rustoleum Fassilux Aqua XPE Matt a non scratch, non yellowing water based easy to apply paint that is tintable to thousands of colours.
Rustoleum Fassilux Aqua XPE Matt is a water-based, non yellowing, scratch resistant, paint lacquer designed for use on wood. A water soluble air-drying topcoat for interior paint applications, based on a polyurethane/alkyd emulsion.
Fassilux Aqua XPE Matt is best used internally to produce a hard wearing, low odour finish available in a variety of different colours to offer high quality decorative finishes.
Rustoleum Fassilux Aqua XPE Matt can be applied using brush, roller or air/airless spray to offer a theoretical coverage rate of 12-13m2 and is best applied using ProDec Advance X7 Paint Brush.
Surface and Environment
Fassilux Aqua XPE Matt can be used on properly prepared wood surfaces or other already painted mineral substrates to provide a scratch resistant finish ideal for domestic interior use.
- A Non Yellowing water-based Paint for wood
- Fassilux XPE Aqua Matt is a scratch resistant wood lacquer
- Fassilux Aqua is low odour and low VOC
|Type:||Water based scratch resistant matt lacquer|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||30 g/l max|
|Suitable Substrates:||Wooden or other already painted mineral substrates|
|Application Method:||Brush, Roller, Airless Spray or Air-Atomised Spray|
|Theoretical Coverage:||Approx. 12 m²/l|
|Wet Film Thickness (WFT):||80 μm|
|Dry Film Thickness (DFT):||34 μm|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||1 week at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||1 year from date of production unopened|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.