£7.75 delivery on orders excluding certain products & postcodes *
*Sherwin Williams Epidek M377 Epoxy Deck Coat - Formerly Leighs
SKU
ID4184
***
This product is now discontinued. See Centrecoat MMA Deck Coat as a potential alternative.
In stock
Product Description
Please note, this product is now discontinued. See Centrecoat MMA Deck Coat as a potential alternative.
Sherwin Williams Epidek M377 is a specially formulated 2 pack epoxy deck coating with suitable profile and co-efficient of friction to comply with current MoD(N) requirements for flight decks and weather decks.
Best Uses
Sherwin Williams Epidek M377 is suitable for Ministry of Defence flight decks and weather decks. May be used over suitably primed surfaces of steel or aluminium. Also, suitable for prepared concrete surfaces.
Application
Apply using brush or sprayer such as Sagola 429/N Hopper Gun with a 4mm tip. Normally applied as a two coat system that is indefinitely overcoatable with itself provided the surface is clean, dry and free from contamination. Use appropriate primer as per Technical tab or see datasheet.
Technical Details
Approvals
- Approved by MoD/DRA to AFS No. 1791
- NATO Approval No. 8010-99-777-8692 (Black)
- Approved for DEF STAN 80-134 Type 1 Medium Texture
- Meets BS476 Part 7 - Surface Spread of Flame
Recommended Primers For Steel
- Macropoxy C425V2 Zinc Phosphate Primer/Buildcoat
- Macropoxy L425 Zinc Phosphate Primer
Recommended Primers For Aluminium
- Macropoxy L425 Zinc Phosphate Primer
Technical Info
- Do not apply if temperatures are below 10°
| Components: | Two Pack |
| Type: | Epoxy |
| Finish: | - |
| Stock Colours: | Black |
| Tintable: | Limited Range. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 330 gms/litre |
| Volume Solids: | 62 ± 3% |
| Suitable Substrates: | Steel, Aluminium |
| Application Method: | Brush or Spray |
| Theoretical Coverage: | 2.5m2/ltr |
| Wet Film Thickness (WFT): | 403 microns |
| Dry Film Thickness (DFT): | 250 microns |
| Induction Time: | - |
| Pot Life: | 10 hours at 15°C |
| Touch Dry: | 4 hours at 15°C |
| Overcoatable: | 6 hours at 15°C |
| To Handle: | 24 hours at 15°C |
| Cleaner / Thinner: | Thinner No.5 |
| Shelf Life: | 18 months from date of production unopened or 'Use By' date where specified |
| Packaging: | Available in 4 Litres |
Related Products
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Sherwin Williams Macropoxy M262 - Formerly Leighs Epigrip M262
A durable 2 pack epoxy high build gloss finish for interior or exterior use, suitable for concrete floors.
From
£142.70
£118.92
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
Sherwin Williams Cleanser Thinner C5
A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.
From
£59.58
£49.65
Sherwin Williams Degreaser W500 - Formerly Leighs Envirogard
A water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or agg...
From
£77.24
£64.37
Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.
From
£158.24
£131.87
Sherwin Williams Macropoxy C425V2 - Formerly Leighs Epigrip
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
From
£120.86
£100.72