Mapei Mapecolor Paste

SKU
id10287
Non Hazardous
Colouring system for on-site mixing to Mapei floor paints.
Mapeicolor Paste is available in 19 standard RAL colours, supplied in 0.7 kg tubs
From £31.24 £26.03
In stock
Only %1 left
Product Description

Mapei Mapecolor Paste has been formulated to add colour to a range of different products from the Mapefloor floor coating range, it creates a convenient colour tinting system that can be added on-site.

Mapei Mapecolor Paste has been formulated to add colour to a range of neutral epoxy formulations from Mapefloor floor coating systems, such as Primer SN, Mapefloor I 300SL, Mapefloor I 500 W, Mapecoat I 620 W and Mapecoat I 24.

Mapecolor Paste consists of selected pigments and grinding vehicles using solvent-free solutions for adding to a number of products from the Mapefloor range. Mapecolor Paste can be added on-site, avoiding the need to store batches of pre-coloured products.

Mapeicolor Paste is available in 19 standard RAL colours. Other RAL colours are available upon request (minimum order quantity 25 Kg).

Best Uses

Created as a convenient colour tinting system Mapecolor Paste can be added on-site to a number different products from the Mapefloor floor coating range. Using Mapecolor Paste avoids the need for storing pre-coloured batches of floor coatings, allowing for colouring a single or multiple pots of floor coating as and when required.

Application

Mix Mapecolor Paste into a Mapefloor system epoxy product slowly and thoroughly. It is recommended that the paste is mixed well before use to ensure the tinted product is smooth and even.

Technical Details

Technical Info

  • Mapecolor Paste for colouring Mapefloor system neutral epoxy products
  • Convenient colouring system for use on-site
Components: Single Pack
Type: Paste
Finish: n/a
Stock Colours: Available in 19 different RAL colours
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: -
Dry Solids Content: 99 ± 1%
Suitable Substrates: Add to neutral epoxy formulations such as Primer SN or Mapefloor I 500 W
Application Method: Mix slowly into the epoxy products which make up the Mapefloor System to avoid the formation of air bubbles.
Recommendations: Do not apply if the temperature is lower than +10°C
Consumpton: From 5 to 10% by weight dependent on the product to be
coloured
Touch Dry: -
Overcoatable: -
Fully Cured: -
Shelf Life: 24 months from date of production unopened 
Packaging: Available in 0.7 Kg drums

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use