Jotun Safeguard Universal ES is a two component polyamide cured vinyl epoxy based coating that is specially designed as a tie coat between epoxy primers and anti-fouling systems. It can be applied at sub zero surface temperatures.
Jotun Safeguard Universal ES is formulated to be used as tie coat in atmospheric and immersed environments.Suitable as a tie coat for a wide range of Jotun topcoats and anti-fouling. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures. It provides a very good adhesion for self-polishing anti-fouling as well as various topcoats (not alkyds).
Suitable for marine exterior areas, and specially designed for outside hull, may be used on superstructure, decks and other external areas. Suitable as tie coat in a complete system exposed to a wide range of corrosive environments up to very high, and immersed. Recommended for offshore environments, including splash zones, water inlets, cooling pipes, jetties and bridges.
If used as a tie coat applied with dry film thickness 50-75 μm on existing antifouling systems, it is recommended to add 5-10% Jotun Thinner No. 17. To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Apply using airless spray. Use a brush for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
|Type:||Polyamide cured vinyl epoxy based coating|
|VOC Content:||362.0g per Litre|
|Suitable Substrates:||Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates|
|Application Method:||Airless Spray. Use a Brush for stripe coating and small areas|
|Theoretical Coverage:||3.1 - 12.4 m2 per litre|
|Wet Film Thickness (WFT):||80 - 325 microns|
|Dry Film Thickness (DFT):||50 - 200 microns|
|Induction Time:||10 mins at 23°C|
|Pot Life:||2 hours at 23°C|
|Touch Dry:||5 hours at 10°C|
|Overcoatable:||18 hours at 10°C|
|Fully Cured:||For Immersion: 36 hours at 10°C, For Service: 5 days at 10°C|
|Cleaner / Thinner:||Jotun Thinner No. 17|
|Shelf Life:||48 months|
|Packaging:||Available in 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.