Teamac Marine Gloss is a high quality coating for Metal, Wood and Glass Fibre surfaces in marine environments.
Teamac Marine Gloss is a modified long oil alkyd and a top quality marine paint. It has excellent opacity and its high gloss finish is suitable for all general marine areas including boat bridge decks and walkways, masts and marine superstructures, etc.
Teamac Marine Gloss can be used to obliterate bright colours, even when replacing with a lighter colour. When using matching or similar colours, there will be no need for an undercoat.
PROMAIN ARE DELIGHTED TO MAKE A DONATION TO THE ROYAL NATIONAL LIFEBOAT INSTITUTION FOR EVERY TIN OF TEAMAC MARINE GLOSS PAINT ORDERED THROUGH US.
Teamac Marine Gloss is used for painting marine areas and frameworks. Teamac Marine Paint will provide excellent adhesive properties to metal, wood and fibreglass.
When applying Marine Gloss below the waterline on Fibreglass Boats or Yachts, we would recommend using Metaclor primer rather than a marine undercoat, as this will achieve a better end result.
Teamac Marine Gloss can be applied using a brush, roller or spray. However, considering the size of yachts, boats and maritime equipment and structures, we would recommend using a spray for faster coverage. Teamac Marine Coating is available in 2.5 and 5 litre tins and has a theoretical coverage of 12 square metres per litre. Marine Gloss Paint is available in dozens of colours which enables the rejuvenation of a spectrum of Marine structures.
Surface and Environment
Teamac Marine Gloss has been specifically designed for marine use. Maritime structures are exposed to the harshest of elements and water attack. Teamac Marine Gloss paint has excellent water resistance and produces a smooth decorative coating that looks good and maintains it's appearance, even in the harshest of conditions.
|Type:||Long Oil Alkyd|
|Stock Colours:||See Colour Card|
|Tintable:||Yes, upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||530.0g per Litre|
|Suitable Substrates:||Suitable for all general marine areas, bridge fonts, deck work, masts, superstructures etc.|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||12 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||80 microns|
|Dry Film Thickness (DFT):||35 - 40 microns|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 12 or overnight hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||2 years unopened in original container|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.