NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

International Intergard 740
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

From £120.77 £100.64
International Interfine 979
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

From £265.20 £221.00
International Intertherm 3070
Formulated specifically to provide corrosion protection for the subsea market.

From £773.83 £644.86
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £347.63 £289.69
International Interzinc 52
A two component, anti-corrosive metallic zinc rich epoxy primer.

From £340.96 £284.13
International Interthane 990
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

From £116.82 £97.35
International Interfine 691
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

From £96.59 £80.49
International Interfine 878
A tough, hard wearing finish coat for application over properly primed surfaces.

From £365.58 £304.65
International Intergard 410
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

From £99.60 £83.00
International Intergard 475HS
A low VOC, high solids, high build, two component epoxy coating.

From £318.67 £265.56
International Intershield 300
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

From £398.16 £331.80
International Interzone 1000
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

From £557.99 £464.99
International Intergard 269
A quick drying two component epoxy primer for immersed or exposed conditions within a system.

From £79.68 £66.40
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

From £377.92 £314.93
International Interline 850
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

From £625.42 £521.18
International Interline 925
For application to steel tank internals.

From £751.30 £626.08
International Non Slip Aggregate - GMA131, GPA900, GMA132
Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

From £8.35 £6.96
International Interline 399
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

From £643.78 £536.48
International Intertherm 50
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

From £192.89 £160.74
International Interzone 954
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

From £123.78 £103.15
International Interzone 3507
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

From £349.30 £291.08

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)