NORSOK Approved Paints

Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

From £169.39 £141.16
Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

From £180.00 £150.00
Carboline Thermaline 440 Primer Formerly 400 EU Primer
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.

£188.40 £157.00
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

From £132.30 £110.25
Jotun Hardtop One
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

From £210.88 £175.73
Jotun Jotamastic Smart Pack HB
A two component surface tolerant, high solids, high build coating. NORSOK approved.

From £141.70 £118.08
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.

From £191.24 £159.37
PPG SigmaTherm 540 Moisture Cure Silicone
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

From £152.88 £127.40

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)