NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Sherwin Williams Macropoxy 646 Epoxy Primer Finish
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

From £197.74 £164.78
Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

From £227.36 £189.47
Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

From £173.16 £144.30
Jotun Jotamastic Smart Pack
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

From £126.36 £105.30
Sherwin Williams Epo-Phen FF Epoxy Phenolic Coating
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.

From £180.10 £150.08
Sherwin Williams Acrolon 7300 Acrylic Finish
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

From £123.55 £102.96
PPG SigmaTherm 540 Moisture Cure Silicone
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

From £152.88 £127.40
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.

From £191.24 £159.37

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)