NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

PPG SigmaGuard 750
A 2 pack, moisture curing, zinc rich silicate coating. Provides excellent solvent and chemical resistance to tanks.

From £572.48 £477.07
Hempel Hempadur 15570
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.

From £50.95 £42.46
Carboline Thermaline 4700 Aluminium
A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

From £89.40 £74.50
Jotun Hardtop One
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

From £210.88 £175.73
International Interfine 878
A tough, hard wearing finish coat for application over properly primed surfaces.

From £365.58 £304.65
International Interthane 990
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

From £116.82 £97.35
International Interfine 691
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

From £96.59 £80.49
International Interfine 979
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

From £265.20 £221.00
International Interzone 954
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

From £123.78 £103.15
International Intergard 475HS
A low VOC, high solids, high build, two component epoxy coating.

From £318.67 £265.56
International Interzone 1000
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

From £609.18 £507.65
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.

From £191.24 £159.37
International Interzone 3507
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

From £349.30 £291.08
PPG SigmaTherm 540 Moisture Cure Silicone
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

From £152.88 £127.40

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)