£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Price £100.00 - £199.99 Remove This Item
  2. Substrate Steel, Stainless Remove This Item
Clear All
Filter by

5 Items

Set Descending Direction
  1. Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
    Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip

    A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

    From £158.24 £131.87
  2. Jotun Solvalitt
    Jotun Solvalitt

    A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

    From £130.14 £108.45
  3. Jotun Jotamastic Smart Pack
    Jotun Jotamastic Smart Pack

    A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

    From £126.36 £105.30
  4. Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat
    Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat

    Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

    From £180.00 £150.00
per page
System 1 (pre-qualified) Carbon steel with maximum operating temperature < 120°C (248°F)
Structural steel
Exteriors of equipment, vessels, piping and valves (not insulated)
System 2 Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified) Internal surface of carbon steel tanks
System 4 (pre-qualified) Walkways, escape routes and lay down areas
System 5A (pre-qualified) Epoxy-based fire protection
System 5B (pre-qualified) Cement-based fire protection
System 6A Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B Hot-dipped, galvanized steel when painting is required
System 6C Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified) Carbon and stainless steel in the splash zone
System 7B (pre-qualified) Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified) Submerged carbon and stainless steel > 50°C (122°F)
System 8a

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9 Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)