£9.95 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Price £100.00 - £199.99 Remove This Item
  2. Substrate Steel, Stainless Remove This Item
Clear All
Filter by

5 Items

Set Descending Direction
  1. Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat
    Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat

    Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

    From £180.00 £150.00
  3. Jotun Solvalitt
    Jotun Solvalitt

    A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

    From £130.14 £108.45
  4. Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip
    Sherwin Williams Macropoxy L425 - Formerly Leighs Epigrip

    A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

    From £158.24 £131.87
  5. Jotun Jotamastic Smart Pack
    Jotun Jotamastic Smart Pack

    A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.

    From £126.36 £105.30
per page
System 1 (pre-qualified) Carbon steel with maximum operating temperature < 120°C (248°F)
Structural steel
Exteriors of equipment, vessels, piping and valves (not insulated)
System 2 Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified) Internal surface of carbon steel tanks
System 4 (pre-qualified) Walkways, escape routes and lay down areas
System 5A (pre-qualified) Epoxy-based fire protection
System 5B (pre-qualified) Cement-based fire protection
System 6A Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B Hot-dipped, galvanized steel when painting is required
System 6C Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified) Carbon and stainless steel in the splash zone
System 7B (pre-qualified) Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified) Submerged carbon and stainless steel > 50°C (122°F)
System 8a

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9 Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)