£7.75 delivery on orders excluding certain products & postcodes *
PPG Sigma EP112 Miocoat (formerly Amercoat 4613) is a two component, high solids, micaceous iron oxide pigmented, polyamide cured, epoxy coating designed for general purpose use on steel and concrete structures, as part of protective coating systems exposed to the outdoor world. Highway Agency Item 112.
PPG Sigma EP112 Miocoat has been specifically manufactured for multi-purpose usage, available in dark grey or light grey, that can be applied to a variety of different steel and concrete structures, exposed to coastal, marine and industrial environments, where atmospheric conditions can cause damage to the substrate.
PPG Sigma EP112 Miocoat should be applied using brush or airless spray and can even be applied at low conditions down to -5°C, for application where warm ventilation is not feasibly possible. Where conditions are of around 20°C then you will be provide with a touch dry surface after 2 hours ready for recoating after 8 hours. The fully cured substrate will be able to withstand temperatures of up to 200°C in normal, dry conditions.
PPG Sigma EP 112 Miocoat should be applied primarily to steel and concrete and works best in an external environment to offer excellent adhesion to bare or previously painted substrates. Sigma EP112 offers outstanding durability even in adverse conditions and can be applied to vertical or horizontal surfaces respectively.
This product is the MIO coat for the following systems:
Components: | Two component |
Type: | Epoxy Coating |
Finish: | Eggshell |
Stock Colours: | Dark Grey, Light Grey |
Tintable: | |
VOC Content: | 245 g/l |
Volume Solids: | 70 +/- 2% |
Suitable Substrates: | Steel |
Application Method: | Brush, Roller, Airless Spray or Air Spray |
Theoretical Coverage: | 7.0 m2 per litre at 100 microns |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | 75 - 150 microns depending on system |
Induction Time: | - |
Pot Life: | 6 hours at 20°C |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | After minimum of 8 hours to maximum of 6 months at 20°C *see additional data |
Fully Cured: | 7 days at 20°C *see additional data |
Cleaner / Thinner: | PPG Thinner 91-92, Clean with PPG Thinner 90-53 |
Shelf Life: | 2 years from date of production unopened |
Packaging: | Available in 4 and 20 Litres |