PPG Sigma EP 159 Sealer should primarily be used to seal previously painted metal substrates, in order to resist dust and dirt and provide users with a surface that can be easily cleaned in industrial and commercial environments.
PPG Sigma EP 159 Sealer can be applied using airless spray and a brush should only be used for touch up purposes, where spraying would not be appropriate. Sigma EP 159 Sealer is an extremely fast drying product that produces a touch dry finish after 45 minutes and can be recoated after 8 hours if necessary.
PPG Sigma EP 159 Sealer be used internally or externally, as a sealer, to be used on fresh metal sprayed substrates. Please don't hesitate to call us if you require more information on this product.
|VOC Content:||549 g/l|
|Suitable Substrates:||Fresh metal sprayed substrates|
|Application Method:||Airless Spray|
|Theoretical Coverage:||12-20 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||12 – 20 m² / L|
|Pot Life:||8 hours at 20°C|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||After minimum 8 hours to maximum of 96 hours at 20°C|
|Fully Cured:||days at 20°C|
|Cleaner / Thinner:||Clean with PPG Thinner 90-53|
|Packaging:||Available in 4 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.