£7.75 delivery on orders excluding certain products & postcodes *
Promain are able to offer the full range of paints specified by the Highways Agency known as Item numbers, these are paints that have been tested and approved for the Highways Agency providing them with a quality controlled range of products from manufactures such as PPG Sigma formally known as Ameron, Amercoat, Mebon and Mebopro. Other manufactures such as Leigh’s Paints who have now been acquired by Sherwin Williams, 3M, Hempel, Jotun, and Dacrylate Paints also offer a range of coatings that fit the Highways Agency criteria,
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155
A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.
A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.
A flexible coating with good abrasion and impact resistance. BBA Cert No. 08/H135-PS5. Highways Approved Item No.110
A one pack, high build bituminous coating for use behind linings and in cofferdams for the protection of enclosed steel. Highways Approved Item No.141...
Mordant wash solution formulated to give galvanised surfaces a chemical pre treatment. Highways Item No.155.
A two pack epoxy sealer pigmented with aluminium. Highways Approved Item 159.
A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency Item No.110
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
A two component coating for use in atmospheric and immersed environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).