£7.75 delivery on orders excluding certain products & postcodes *
Rustoleum Galva Zinc 1085 is ideally suited for use in industrial exposures where there is a need for protecting steel against rust. Rustoleum Galva Zinc 1085 is suitable for use on a variety of different metal substrates, including storage tanks, guard rails, ducts and production wells.
Rustoleum 1085 Galva Zinc should be used on new, bare steel, blasted steel or galvanized steel surfaces. Rustoleum 1085 Galva Zinc is primarily intended for brush application on small areas or for touch-up. Can be recoated with non-saponifiable coatings. Rustoleum 1085 Galva Zinc should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.
Components: | Single Pack |
Type: | Solvent Based |
Finish: | Matt |
Stock Colours: | Grey |
Tintable: | No |
VOC Content: | 630 g/l |
Volume Solids: | - |
Suitable Substrates: | New, bare steel or galvanised steel |
Application Method: | Brush |
Theoretical Coverage: | 1,4 m² per spray can at 35 μm dry |
Wet Film Thickness (WFT): | 100 μm |
Dry Film Thickness (DFT): | 35 μm |
Induction Time: | - |
Touch Dry: | 10 minutes at 20°C |
Dry to Handle: | 30 minutes at 20°C |
Dry to Recoat: | Within 1 hour or after 48 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | - |
Shelf Life: | 3 years from date of production in unopened cans |
Packaging: | Available in 500ml, 1 Litre, 1 Kg Tins and 500ml Aerosols |