PPG SigmaLine 2000 is a two component solvent free amine cured phenolic epoxy coating designed to provide a one coat system to metal for pipe externals.
SigmaLine 2000 dries to form a glossy and smooth finish in red brown.
PPG SigmaLine 2000 has been designed to offer protection and decoration to the external of pipes and is extremely suitable for bell holing jobs. This product has been manufactured as a multi purpose substance to offer quality, protective finishes to a variety of steel coatings.
PPG SigmaLine 2000 should be applied using a heavy duty twin feed hot airless spray to produce a smooth glossy finish with a theoretical coverage rate of 1.7m2 per litre, per coat. SigmaLine 2000 is touch dry after 6 hours, ready for a recoat after 24 hours.
Surface and Environment
PPG SigmaLine 2000 has been specifically designed for use on steel substrates that have been blasted ready for a protective, decorative coating. 2000 can be applied to surfaces with a temperature of up to 90°C and works to reduce the risk of fire and explosions in confined, hot environments.
- Two component solvent free amine cured phenolic epoxy coating
- One coat system direct to metal for pipe externals
- Suitable for e.g. bell holing jobs
- Resistant to well designed cathodic protection
|Type:||Solvent Free, Amine Cured Phenolic|
|Stock Colours:||Red Brown|
|VOC Content:||146.0g per Litre|
|Suitable Substrates:||For pipe externals or bell holing jobs|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||1.7 m2 per litre at 600 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||600 - 1500 microns|
|Pot Life:||1 hours at 20°C|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||Between 24 hours to 2 months at 20°C|
|Fully Cured:||5 days at 20°C|
|Cleaner / Thinner:||Do not thin|
|Shelf Life:||24 months when stored cool and dry|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.