Sika® Level-01 Primer is used for sealing of mineral substrates and enhancing the bond of cementitious underlayment's, industrial grade screeds and mortars. It is suitable for priming anhydrite screed substrates, and is particularly suitable for using prior to the Sika® Level range of underlayment's.
Application is best done by brush or by roller (which achieve better penetration and productivity).
Surfaces must be sound, open textured, clean and free from frost, cement laitance, surface water, oil, grease, coatings, all loose or friable particles and any other
surface contaminants. The substrate must be prepared by suitable mechanical preparation techniques such as high-pressure water or abrasive blast cleaning equipment.
All dust, loose and friable material must be completely removed before application of the product, preferably by brush and/or vacuum.
The substrate can be dampened to a saturated surface dry (SSD) condition prior to application of the diluted Sika® Level-01 Primer.
Full application details can be found on the product data sheet.
|Type:||Water based acrylic resin|
|Suitable Substrates:||Concrete or Mortar|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||0.10–0.20 kg / m2/coat (5–10 m2/ kg/coat ) of diluted product.|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||Diluted material apply within 8 hours|
|Touch Dry:||hours at 20°C|
|Overcoatable:||2-4 hours with substrate temperature at +20°C. Full details can be found on the data sheet|
|Fully Cured:||See Data Sheet|
|Cleaner / Thinner:||Clean all tools with water immediately after use. Hardened/cured material can only be removed mechanically|
|Shelf Life:||12 months from date of production unopened|
|Packaging:||Available in 10 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.