Sikagard® 680S Clearglaze is a quick drying, protective coating for exposed aggregate concrete.
Sikagard® 680S is a solvent coating which is based on methacrylic resins and is resistant to weathering, alkalis and ageing. It provides a clear glossy coating and is suitable for mineral substrates including concrete and other cementitious surfaces.
Sikagard® 680S Clearglaze protects and enhances concrete and cementitious materials on buildings and infrastructures. It is suitable for the protection against ingress, provision of moisture control and increasing the restivity on exposed aggregate concrete.
Sikagard® 680S Clearglaze has quick drying properties, affording a coating which is rain resistant within a short time after application. It is recommended that 50 percent of Sikagard® 680S Clear Glaze is added to the first coat of Sikagard® 680S Top Coat, when applying to very absorbent and/or porous substrates. This will strengthen the substrate and reduce the risk of a patchy appearance.
Surface and Environment
Sikagard® 680S Clearglaze provides a colourless clear glaze which drys to a glossy protective and/or refresher coating for exposed aggregate concrete. Sikagard® 680S Clearglaze delivers excellent weather resistant properties and is based on a methacrylic resin with fast evaporating solvents. There is minimal change to the texture characteristics, when applied to the concrete surface.
Sikagard® 680S protects concrete substrates against penetration from the salts and gases which cause atmospheric attack. Sikagard® 680S also resists carbon dioxide, thus reducing the rate and depth of carbonation to the concrete.
- Stir thoroughly before application
- Application: Brush or short pile lambskin roller
- Protects against aggressive atmospheric and carbon dioxide damage
- Does not adversely affect water vapour permeability
- Reduces dirt pick up and rain discolouration
- Cleaner: Sika Thinner C
- Size: 20kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.