£7.75 delivery on orders excluding certain products & postcodes *
Teknos Forme is formulated for use prior to the application of the Teknos range of water based parquet lacquers.
Teknos Forme has been classified to Group M1 in Emission Classification of building materials. Teknos Forme has been awarded the Key Flag Symbol (Avainlippu), marking Finnish origin.
Apply using a steel trowel, felt trowel, lacquer brush or lacquer roller.
Sand the wooden surface properly, finish with sandpaper no100 or finer. Fill the gaps with Teknos GAP Parquet putty during the intersanding process. After finishing sanding, apply a coat of Teknos Forme primer with a stainless steel trowel, felt trowel, lacquer brush or roller.
Steel trowel application: Apply 3–4 coats. If needed, intersand between coats with, for example, abrasive net or sandpaper grit 120.
Felt trowel, lacquer roller or brush application: Apply one coat. Intersand between coats with, for example, abrasive net or sandpaper grit 120. If needed, apply another coat with a steel trowel.
After priming, finish with Teknos water-based parquet lacquer. Water-borne primers may cause slight swelling of the wooden surface. If an absolutely smooth surface is desired, sand the surface lightly after the first lacquer coat. Ensure that the primer has fully dried before applying the top lacquer.
Components: | Single Pack |
Type: | Water Borne |
Finish: | |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 140 g/L |
Volume Solids: | 31% |
Suitable Substrates: | Internal wood and parquet flooring |
Application Method: | Steel Trowel, Felt Trowel, Lacquer Brush, Lacquer Roller |
Theoretical Coverage: | One coat with steel trowel: approx 25 m2 per litre 3 coats with steel trowel: approx 10 - 12 m2 per litre One coat with felt trowel, lacquer brush or lacquer roller: approx 10 m2 per litre |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | |
Induction Time: | - |
Pot Life: | - |
Surface Dry: | Steel trowel application: After 30 to 60 minutes at 20C Felt trowel, lacquer roller or brush application: After 2 hous at 20C |
Overcoatable: | |
Fully Cured: | |
Cleaner / Thinner: | Water. Wash the equipment immediately after use with water and Teknos Rensa Brush Cleaner. |
Shelf Life: | 1 year in original unopened containers. |
Packaging: | Available in 5 Litres |