Teknos Helo Yacht Varnish

SKU
id19517
UN1263 (Class: 3, Pk Grp: III)
A fast drying urethane alkyd based full gloss clear varnish with good resistance properties for yacht wood in either fresh or sea water.
Available in 0.9 and 2.7 Litres
From £18.78 £15.65
In stock
Only %1 left
Product Description

Teknos Helo Yacht Varnish is a fast drying urethane alkyd based full gloss clear varnish with good resistance properties for yacht wood in either fresh or sea water.

Best Uses

Teknos Helo Yacht provides excellent resistance to action by weather and water. The varnish film has good gloss retention and does not crack or disintegrate. The varnish contains UV absorber, and therefore the resultant coat yellows very little. Teknos Helo Yacht does not yellow even in sea water. It protects the woodwork against greying and cracking.

Teknos Helo Yacht film is hard and at the same time elastic and thus withstands abrasion and impacts. Detergents, grease or oil do not damage it. Examples of uses are yachts, furniture and other woodwork whenever a durable varnish coat is desired.

Application

Clean the surfaces from grease and dirt. Wash varnished surfaces with Teknos Rensa Super paint cleaner. Matt down old, intact varnish coats. If the old varnish coat is brittle or flaking, it is removed by scraper and paint remover. Cautious burning off can also be used. Thereafter the surface is sanded. Object susceptible to moisture are before the varnishing primed with clear Teknos Woodex Base priming oil. Sand the surface again before varnishing and remove the dust.

Stir the varnish thoroughly before use down to the bottom of the can. Dilute the varnish for priming by about 20% with Teknosolv 1621. Sand lightly and remove the dust before the top coating. Top coat with undiluted Teknos Helo Yacht varnish. Apply two to four coats of the varnish. Sand lightly and remove the dust between all varnish coats.

Technical Details
Components: One Part
Type: Urethane Alkyd
Finish: Full Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 500.0g per Litre
Volume Solids: 50%
Suitable Substrates: For yachts wood, wood furniture and other woodwork whenever a durable
varnish coat is desired.
Application Method: Broad Varnish Brush
Theoretical Coverage: 10 - 14 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: 6 hours at 20°C
Overcoatable: 16 hours at 20°C
Fully Cured:
Cleaner / Thinner: Teknosolv 1621 (solvent naphtha)
Shelf Life:
Packaging: Available in 0.9 and 2.7 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use