Teknos Teknoceiling 02

SKU
id23718
Non Hazardous
A full matt, water borne acrylic topcoat for internal ceilings and walls.
Available in 2.7 and 9 Litres
From £18.08 £15.07
In stock
Only %1 left
Product Description

Teknos Teknoceiling 02 is a water-borne acrylic dispersion paint for use as a full matt topcoat internally on ceilings or walls.

Best Uses

Teknos Teknoceiling 02 is suitable for use as a top coat on surfaces in dry interior premises. Areas of suitable application include ceilings in apartments and office rooms, and walls and ceilings in storerooms and factories.

The painted surface resists slight wear. Wet scrub resistance, class 3 according to EN 13300 (ISO 11998).

Suitable for application onto concrete, plaster, filler, brick, wood or various building boards.

Application

Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding. Remove any dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash.

For spray filler ceilings, which are not waterproof, firstly prime with a solvent borne primer such as Teknos Futura 3. For smoothing of irregularities in the substrate, apply a suitable primer from the Teknos Teknospro series. Sand down and remove any dust. Prime steel surfaces with Teknos Ferrex Aqua Anti-corrosive paint.

Before use stir the paint thoroughly. Thin down with fresh water if required. Apply once or twice by brush, roller or spray.

Technical Details
Components: Single Pack
Type: Water borne acrylic
Finish: Full matt
Stock Colours: White
Tintable: Yes, to light pastel shades according to Teknos Interior Colour Cards. The colour accuracy is not complete. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30 g/L
Volume Solids: 38%
Suitable Substrates: Can be applied to concrete, plaster, filler, brick, wood or various building boards.
Application Method: Brush, Roller or Spray
Theoretical Coverage: 5 - 8 m2 per litre onto a smooth surface
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Dust Free: 30 minutes at 23°C
Overcoatable: After 1 hour minimum at 23°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 2.7 and 9 Litres

 

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use