Owatrol Textrol Penetrating Oil Finish is a deep penetrating solvent based oil which provides a long lasting UV and mildew resistant finish to wooden surfaces.
Limited quantities of Redwood Tone in stock please call to place order
Owatrol Textrol penetrating oil finish is one of the most popular wood oils for exterior and interior application and is produced by Owatrol. A deep penetrating oil suitable for both vertical and horizontal timber surfaces. Textrol penetrates the timber saturating the fibres without leaving a film on the surface of the wood resulting in Textrol guaranteeing not to flake, peel or blister. The unique blend of oils in Textrol is formulated to provide a long lasting UV and mildew resistant finish that is also resistant to weathering whilst enhancing the beauty of the wood.
Owatrol Textrol is a penetrating oil finish that is designed to revitalize weather-beaten, dried-out decks and exterior wood. Textrol restores the rich, warm appearance of natural wood and beautifies exterior wood. Developed to penetrate deep into the wood, it protects against damage caused by moisture and ultraviolet rays and provides a mildew resistant finish that will not crack, peel or flake. When Textrol is first applied, the wood will darken to a rich matt colour, and then gradually lighten depending on the intensity of sun exposure.
Textrol may only be applied to bare wood surfaces or a weathered wood surface that was previously finished with Textrol. ALL other finishes must be completely and thoroughly removed.
Owatrol Textrol can be applied using a brush, roller or airless spray with a theoretical coverage of 5m sq. per litre per 2 coats. For maintenance, where one coat of application is required, the coverage rate will improve to 10-12m2 per litre. For original recoating’s, Textrol can be applied wet on wet, with an overall drying time of 24 hours.
Treat new wood with Seasonite and allow to weather for 12 months and then treat with Net-trol before applying Textrol . Weathered Wood (Wood exposed to weathering for longer than 12 months) should be treated with Net-trol Wood Cleaner & Colour Restorer before applying Textrol. Previously oiled or coated surfaces (paint, stain, varnish…) must have the previous finishes completely and thoroughly removed with Aquanett or Prepdeck and the stripped surface must be neutralised with Net-trol Wood Cleaner & Colour Restorer before applying Textrol.
Please consult Manufacturers Product Data Sheet before application.
Surface and Environment
Textrol can be used on all exterior, vertical or horizontal wooden structures that are pre-prepared. Apply Textrol to soft or hardwoods such as cedar, larch, pine, ash or oak. Textrol penetrating oil is suitable for, but not limited to, decks, walkways, cladding, shingles and fences.
Treat new wood with Seasonite and allow to weather for 12 months. Weathered Wood (Wood exposed to weathering for longer than 12 months) should be treated with Net-trol Wood Cleaner & Colour Restorer, following instructions on the container. Please consult Manufacturers Product Data Sheet before application.
- Use Textrol on horizontal and vertical surface
- Use Owatrol Textrol as a Decking Stain
- Solvent based
- Penetrates and protects from within the wood
- Excellent penetration - Textrol gets into the wood not lying on the surface
- Non-film forming meaning that the timber will not crack, peel or flake
- Protects against moisture and UV damage
- Quick and easy to apply - "wet on wet" application
- Provides mildew resistance
- Textrol offers easy maintenance, no stripping or sanding.
- Apply Textrol by brush, roller, airless spray or garden sprayer
- Must be applied 'wet on wet'
- Drying time: 24 hours
- Theoretical coverage for Textrol is 5m2 per litre per 2 coats
- Theoretical coverage for maintenance: 10m2 - 12m2 per litre
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.